What DSP Processing Does LUCIA Amplifiers Have On Board

All Lucia models includes the following DSP processing:

• Comprehensive DSP features Per channel presets for high-pass filter, parametric EQ, multi-band compressor, and look-ahead limiter
• Automatic Dynamic Loudness Contouring DSP automatically adapts to optimize performance at any output level
• Optimized presets Available for specific loudspeaker models
• RS232 Remote control and monitoring from third party control solutions
• GPIO Remote control (e.g. wall panel) for channel switching, level control and integration with paging systems
• Intelligent fan control Silent operation at idle and at lower output levels
• Fail-safe operation Comprehensive short circuit, thermal, and under-voltage protection
• Configuration software Windows and Mac software wizard for initial set-up, and advanced editor for preset configuration (LUCIA connection via USB)

Additional features on LUCIA 60/2M, 120/2M and 240/2M only

• Maximum output power across range of loads  Power output remains constant into 2, 4 or 8 ohms
• Auto Load Sense Proprietary auto-set VPL (Voltage Peak Limiter) for optimum performance with any connected load
• 4 x 4 mix matrix Route input signals internally to amplifier or to line-level outputs

Additional features on LUCIA 60/2, 120/2 and 240/2 only

• Maximum output power across range of loads  Power output remains constant into 2, 4 or 8 ohms
• Auto Load Sense Proprietary auto-set VPL (Voltage Peak Limiter) for optimum performance with any connected load
• 2 x 2 mix matrix Route input signals internally to either one or both amplifier channels

Additional features on LUCIA 60/1-70, 120/1-70 and 240/1-70 only

• Model for constant voltage applications into 70 V/100 V
• 2 x 1 mix matrix Mix two sources to mono or use for source selection